Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

password

Created by: undin at: 2/27/2006 6:06 PM (4 Replies)

Rating (4)

Thanks 0

5 Entries

2/27/2006 6:06 PM	Rate (0)
undin Posts: 2 Rating: (1)	Hi ! I`m new here.[:)] I forgot my password in my program in logo, Is there a posible way to re-cover it?
undin Posts: 2 Rating: (1)
Suggestion To thank Quote Answer

2/28/2006 1:41 PM	Rate (3)
Fux Posts: 661 Rating: (123)	You can find your answer in the following link: /tf/WW/en/Posts/468
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

2/28/2006 4:04 PM	Rate (1)
undin Posts: 2 Rating: (1)	[:D] Thank`s a lot!
undin Posts: 2 Rating: (1)
Suggestion To thank Quote Answer

9/13/2006 12:12 AM	Rate (0)
Simatikero Posts: 13 Rating: (0)	Hope you haven't deleted your program yet. There is a way to "crack" the password. You need to open and disassemble the LOGO! find the EEPROM and dump it. The password is not encrypted. It can be viewed by any hex editor.
Simatikero Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

10/23/2006 12:54 PM	Rate (0)
Hänninen Posts: 9 Rating: (0)	How do you open and dissemble the LOGO!? How do you get into the LOGO?
Hänninen Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on