Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP 17 internal error #15 and $044 trans. error nr.8

Created by: andris_81 at: 1/10/2007 9:55 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/10/2007 9:55 AM	Rate (0)
andris_81 Posts: 6 Rating: (0)	The dough mixing mashine has a S7 313c and OP17 connected via Profibus. When mashine works sometime on op occure internal error #15 and $044 trans. error nr.8, but it did not stop. A week ago it works fine and nothing changed in system. What does it mean? What is the problem? Possible solutions?
andris_81 Posts: 6 Rating: (0)	Last edited by: andris_81 at: 1/10/2007 10:09 AM One more error: $551 PLC address 2 not possible
Suggestion To thank Quote Answer

1/10/2007 2:21 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi I guess the FAQ-people have already a solution for your problem? http://support.automation.siemens.com/WW/view/en/18845471 http://support.automation.siemens.com/WW/view/en/23369901(increasing communication ressources) nemo
Nemo Posts: 3149 Rating: (171)	Last edited by: Nemo at: 1/10/2007 2:22 PM
Suggestion To thank Quote Answer

1/11/2007 8:28 AM	Rate (0)
andris_81 Posts: 6 Rating: (0)	Thx!
andris_81 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/11/2007 8:47 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	you are welcome [:D]
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on