Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Uploading program to LOGO!

Created by: garion at: 11/14/2011 10:16 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/14/2011 10:16 AM	Rate (0)
garion Posts: 4 Rating: (0)	Hi, I recently purchased a LOGO! 230RC. I'm using the LOGO!Soft Comfort Demo version software that came with the LOGO! (Windows 7 64 bit). I create a quick program to test the functionality of the device but can't upload the program to the device. I can set the clock on the LOGO! using the software so the communications seems to be fine. And I can run the program in the simulation mode, so the program seems to be fine. When I go to 'Tools', and then 'Transfer' on the menu options, I see that the options for 'PC -> LOGO!' and 'LOGO! -> PC' are both greyed out. Please assist. Thanks,
garion Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

11/14/2011 10:26 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, That's because it's a Demo version Demo software With a demo version of LOGO! Soft Comfort, you can easily familiarise yourself with the LOGO!. You can create, simulate, archive and print out circuit programs via a PC for all LOGO! devices. RESTRICTION: You cannot transfer (download or upload) the circuit programs to/from a LOGO! via a programming cable. It is therefore also not possible to perform on-line monitoring or tests of a running program. These features are only possible with a full version of the software. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

11/14/2011 11:03 AM	Rate (0)
garion Posts: 4 Rating: (0)	Thanks! :) Is there a link to get the full version of the software?
garion Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

11/14/2011 11:09 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, For free download, no. For guestions about prices etc. : https://www.automation.siemens.com/partner/index.asp?HTTPS=REDIR&regid=WW&lang=en&comptcid=o Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on