Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

spindle motor 1PH7163-2ND23-0BC0

Created by: Zlatkodo at: 6/29/2012 7:47 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

6/29/2012 7:47 AM	Rate (0)
Zlatkodo Posts: 4 Rating: (0)	Siemens spindle motor 1PH7163-2ND23-0BC0 We need to rewind this motor (probably is 22 kW, 4 pole winding) but we have only empty stator core with no nameplate or winding data . Motor run trough the controller SIMODRIVE 611 , ( 0 to 1400 Hz at pulse frequency 3.2kHz). We need help with all nameplate data, especially : rated frequency and voltage, connection and duty cycle ( for example: 400 V, 50 Hz, Y, S1). BTW, the best help would be to obtain all the winding data, if possible. Thanks in advance. Zlatkodo opetja@ymail.com Attachment DSCF3004.JPG (416 Downloads)
Zlatkodo Posts: 4 Rating: (0)	Last edited by: Zlatkodo at: 6/29/2012 7:49 AM
Suggestion To thank Quote Answer

7/3/2012 1:29 PM	Rate (1)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/14/2024 Posts: 5941 Rating: (816)	Hello, I think it's not too easy to rewind such a motor Attached a figure of the motor parameters. Good luck Attachment 1PH7163-xxD.jpg (393 Downloads)
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

7/3/2012 6:59 PM	Rate (0)
Zlatkodo Posts: 4 Rating: (0)	Thanks for useful data. Seems to me, it's impossible to get the manufacturers winding details (number of turns per coil, wire size...). Zlatkodo
Zlatkodo Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on