Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OBA7 help with logo

Created by: snarf20 at: 7/10/2012 4:32 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

7/10/2012 4:32 AM	Rate (0)
snarf20 Experienced Member Joined: 2/24/2009 Last visit: 11/4/2024 Posts: 41 Rating: (0)	Dear 2 logo OBA7 need to communicate a master and a slave with a KT600 hmi application is to activate the hmi desede inflows to activate an output on the logo 1 and logo 2 other output please help me with some explanatory titurial since in paguina no help regards

Suggestion To thank Quote Answer

7/10/2012 7:14 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Have a look at [url=https://www.automation.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/application-examples/Pages/Default.aspx] Logo Application Examples [/url] Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

7/14/2012 8:34 AM	Rate (0)
snarf20 Experienced Member Joined: 2/24/2009 Last visit: 11/4/2024 Posts: 41 Rating: (0)	Ok Muchas Gracias asunto solucionado Saludos

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on