Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
4 Entries
| 11/13/2013 10:46 AM | |
Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating:
|
Hello, What I can share here would be the following link for block to control pumps with prepared faceplates in WINCC. Example blocks for STEP 7 and WinCCThe strategy to select the starting command (auto seleted & auto ON & no error from electrical section) depends on process requirement.Selection can be made by selector by operator or automatically by checking time in service.Case should be considered for a pump that is faulty for a longer period. That is what I can share for now Hamid Hosseini |
| 11/13/2013 12:43 PM | |
Joined: 11/10/2013 Last visit: 9/15/2022 Posts: 3 Rating:
|
Thx for reply. But I need different block (Duty/Standby).
|
Last edited by: Naishad at: 11/13/2013 12:44 PM |
|
Follow us on