Day profiling

Hi there,

Is there any example where you can turn on or off flags during certain days of the execution of a program ?

Thanks,

Luís

But that only allows me, for example, to turn something off, for example, wednesday from 00:00 to 23:59. But if my program started tuesday at 16:14, the flag wasn't on for 24hours.

I'm trying with the hours counter, but then I'm having some issues on how to relate that with a specific day. For example "turn on the water pump only for the first 24 hours" or "for the first 48 hours" or "only between 24 and 48 hours". It doesn't matter if it's a tuesday or any other week day or what time is it, as long as it runs for 24 hours. A day as in a cycle of 24 hours.

I understand that the first question was kind of generic, since I only wanted an example application of the sorts. After getting the first response, I felt like I had to give out more details in order to get the answer that I wanted/needed. I could've, like you said, started off just like that and that is my bad.

Now, for the question at hand. The 16:13 example was just to say that the program can be started at any given time on any given day and I need a flag to be ON for the first 24, 48 or between 24 and 48 hours. I don't want to be stuck with a configuration on the weekly timer that ultimately doesn't make sense. I just want for my user to be able to say "I want that ON on the first and second day" or "I only want it ON on the second day".

I'm going to try the "Operating Hours Counter with Prewarning" example and see if I can adapt it to what I want.

Hi Imagalhaes,

Perhaps this is what you wanted?

Greets.