Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PG675 printer port

Created by: KaOst at: 3/27/2006 12:00 PM (2 Replies)

Rating (2)

Thanks 0

3 Entries

3/27/2006 12:00 PM	Rate (0)
KaOst Posts: 17 Rating: (2)	Hi! Can anyone tell me how the 25pin printer port of the PG675 is arranged? And, by the way: I also would like to have the cable layout for the PG-PG connection between PG 675 and 685. Regards Kjetil email: kjetil_sletvold@lycos.com
KaOst Posts: 17 Rating: (2)
Suggestion To thank Quote Answer

4/2/2006 8:06 PM	Rate (1)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi Kjetil, I have to search thrue some paperwork, maybe i could find it, i have worked with the two oldys you mentioned last century... [:D] This week I'am not in the bureau, so it will be minimal one week that i could search to the pile of paper. I hope you have some time, the PG-PG cable must also be somewhere between the same pile of paper... [:blush:] Best regards, Late
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

4/22/2006 10:22 AM	Rate (1)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi Kjetil, I have found some pages and copy them for you [:P] If you need some more, please et me know. Attachment Connector Printer PG675.zip (862 Downloads)
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on