Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM458-1 How to upgrade project

Created by: Beren74 at: 1/20/2009 9:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/20/2009 9:39 AM	Rate (0)
Beren74 Posts: 16 Rating: (0)	Hi there I have following task: I had to upgrade the Simatic software on the engineering system of a inspection line I support to the latest version. Now I want to convert the CFC project (line coordination and tension leveling) of the FM458, that I can go online an make changes. I upgraded from CFC/D7-Sys Version 6 to 7. What are the steps I have to do? I dont want the project being crashed. Best regards and thanks in advance Beren74
Beren74 Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

1/20/2009 1:37 PM	Rate (0)
LA_COLD Posts: 24 Rating: (8)	Check out this thread: /tf/WW/en/Posts/20293#top It should help.
LA_COLD Posts: 24 Rating: (8)
Suggestion To thank Quote Answer

1/20/2009 2:57 PM	Rate (0)
Beren74 Posts: 16 Rating: (0)	Thank you. It worked great! Happy greetings Beren74
Beren74 Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on