Navigation

hibernation mode - can't replace the r20189 and r20190

Created by: AutoGen_9720948 at: 3/15/2023 7:37 AM (1 Replies)

3/15/2023 7:37 AM	Rate (0)
AutoGen_9720948 Joined: 3/13/2023 Last visit: 3/23/2023 Posts: 1 Rating: (0)	Hello all, i found this post in search of a sleep/hibernation mode for the G120C. i understand the logic diagram in the picture. but i can't replace the r20189 and r20190. these are FBblocks. So my question is wat is in these blocks? with kind regards, Robin azad_dsc Hi All, I have manage to make the FB for Sleep mode function and running OK. Best regards Azad Attachment Sleep mode FB.jpg(219 Downloads) ------------------------------------------------------------------------------------------ Split from Sinamics G120C in Sleep/standby/ hibernation mode.
	Last edited by: U_8abb2931-556b-451e-8bbb-546f90bf7d6e at: 03/15/2023 07:38:41 Last edited by: U_8abb2931-556b-451e-8bbb-546f90bf7d6e at: 03/15/2023 08:00:53 Last edited by: Jen_Moderator at: 03/15/2023 08:06:37 New subject after splitting. Quote inserted.
Suggestion To thank Quote Answer

3/17/2023 3:40 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 11/5/2024 Posts: 4193 Rating: (472)	U_8abb2931-556b-451e-8bbb-546f90bf7d6e Hello all, i found this post in search of a sleep/hibernation mode for the G120C. i understand the logic diagram in the picture. but i can't replace the r20189 and r20190. these are FBblocks. So my question is wat is in these blocks? with kind regards, Robin azad_dsc Hi All, I have manage to make the FB for Sleep mode function and running OK. Best regards Azad Attachment Sleep mode FB.jpg(219 Downloads) Application functions -> Free blocks -> Memory functions -> RSR (RS FLIP FLOP) There you can program binary memory elemenst (flip-flops). The two parameter you have mentioned, are read only parameters of the status of the Set/reset of a RS Flip/flop 0.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_9720948