Hi,

IOOPT file in attachment, hope it helps,

Hello,

i have tried this format on CFC on a AI block but i can't read the energy.

The primary address of the meter is 1.

M=1(0.6[UINT32])

any tips?

Hi, I've sent you project archieve and 2 ppt files regarding MBus integration.

I hope it helps--

Thks man, i will try next week on the field... maybe i need to change the first address in parenthesis from 0 to 1 or 2.

M=1(0.6[UINT32]) in M=1(1.6[UINT32]).

The com parameters are ok and from ACT i can read correctly the Relay PAdpulse meters. Tnks again

The syntax  i'm using is M=3(0.6[FLOAT]) or M=3(0.3[FLOAT])

On the image there are the data read from the ACT software on the padpulse addressed with the primary address number 3

Thank

Hello,

1.......................

Place and configure TextBlock.

Text1: "Service Order" "1"

Text2: "1" "Energy" "KWh"

Input/Output address: M=1.1(1)

2....................

Read Padpuls with CI block, pointing Input/Output address to that TextBlock:

Input/Output address: M=61(1.1[UINT32])

61 - must be primary address of your PadPuls channel

1.1 - TextBlock pointer.

------------------------

Hope that will help.

I almost smashed my forehead into my desk while I was figuring out how to read the heat meters. It wasn't PadPuls for me, but this solution helped other my collegues as well.

P.S. maybe in you case Text2: "1" "Energy" "KWh" must be "Wh" instead of "KWh"

BR,

Tadas