Hello everyone, I would be very grateful if you could help me solve this problem that I have been struggling with for days.

I have a project that I am sure works. I need to simulate how it works without physically intervening in the HMI screen in this project, you can think of it as a presentation.

However, during the HMI simulation, I get a warning that the address "https://'PCName'WinRH" that it directed me to cannot be reached and I cannot view the simulation.

When I did research for this situation; I saw that I needed to add "SIMATIC WinCC Unified PC" to the project for the simulation. However, as seen in the image, I cannot add it.

For this, I tried to run it by setting up a virtual computer and getting a WinCC trial license. This time, I started to get a warning like "WinCC Upd2 is not installed" and now I cannot even open the HMI project.

I would be glad if you could help me, thank you.

Good work everyone.

Hello,

If you want to simulate an Unified panel, you need to install WinCC Unified PC Runtime

Here a link to download:

SIMATIC WinCC Unified PC Runtime V19 Simulation & Trial

Here links for downloading Updates for TIA Portal v19:

Updates for STEP 7 V19, S7-PLCSIM V19 and WinCC V19

Updates for SIMATIC WinCC Unified PC Runtime V19

Best regards,

Wizard

 .

JimHalpert

Hello!

I think you have forgotten to upload the picture 😅

It seems that there is a version mismatch between your project and installed software. Go to TIA Project View > Help > Installed software and attach a screenshot.

For some reason I don't understand, when I try to upload an image, it gives an error. It's still the same.

In the "Installed Software" window you mentioned, there are "TIA Portal V19 / SINAMICS Startdrive Advanced V19 / STEP 7 Pro V19 / WinCC Basic Comfort Advanced V19 / WinCC Pro V19 / WinCC Unified V19".
WinCC software is visible but it doesn't say updates, I don't know if it should.

Hi,

When the updates are installed. It should be mentioned in the "Installed Software" list. 

Best regards,

Wizard

It was resolved but now when I click on the "start simulation" button the web page that opens says "This site cannot be reached". What could be the reason for this?

Hello,

Good to hear the "First problem" is solved 

For your 'second problem':

Have you seen this link: simulation-running-but-site-cannot-be-reached

Best regards,

Wizard