Hi all

In a machine i don't have access to PLC Program, now i need to increase speed of one axis to 1.5 times.Speed set point comes from network (P1000=6) and machine if multi speed then i cant add a fix number to drive speed.

Do we have any parameter in MM420 drive to multiply the speed by a fix number.

Thanks

hi

Hi

What can i do with P2000?

Thanks

Hi Petr

My problem solved by your help.

Changing scale in P2000 is applied to motor speed exactly (but only when speed value comes from profibus)

Thank you for advice

Regards

P2000 sets the 'reference value' for the 'speed setpoint', for Profibus or serial control.

If the analogue input is providing the setpoint, then P2000 sets the reference value for this also, which means the reference for 10Volts.

Tractor