SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

weekly timers in simulation

5/10/2009 10:05 PM	Rate (0)
alexledger Posts: 1 Rating: (0)	Hi I am a complete newbie with logo, I have a program using 5 weekly timers, that through an and gate, trigger 5 counters when a common input is true. Timer 1 is set in cam 1 mon-fri start 6stop 14 Timer 2 is set in cam 1 mon-fri start 14stop 22 Timer 3 is set in cam 1 mon-thur start 22 stop 6 Timer 4 and 5 are set in cam 1 sat/sun only Yet when in simulation with the internal clock running on a saturday timer 3 is true, as well as the correct timer 4. Timer 3 continues to be true no matter what days are selected. Any Ideas why??
alexledger Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/11/2009 10:32 PM	Rate (0)
Betel Platinum Member Joined: 1/5/2007 Last visit: 4/7/2023 Posts: 1690 Rating: (580)	Hi alexledger, please post your circuit - so we can test it and answer you.....perhaps.... Best regards Betel
	==> Meine TAG-Listen: "deut." ==> "Sammlung von Hinweisen und Schaltungen" ==> "PD-3-Punkt-Schritt-Regelung (z.B. für Mischer)" ==> "Zeiterfassung, ASTRO-Uhr,..." ==> "Meine EXCEL-Tools" + "Tool zur Linearisierung" ==> "Komplexes Rechnen mit der LOGO"
Suggestion To thank Quote Answer

5/13/2009 9:38 AM	Rate (0)
Fux Posts: 661 Rating: (123)	Hi, if you want to enable weekly timer 3 over midnight, then you need 2 cams ! If it shall be active on monday from 22-6 h , the on-time is on monday and the off-time is on tuesday. So you activate the timer on cam 1 (only monday)and deactivate it on cam 2 (only tuesday). Please look at the attachment the 3rd timer B003. You know that you can simulate easily if the timers are switching correctly if you click at the clock symbol in the simulation bar? Attachment weekly timers.zip (544 Downloads)
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

Share this page:

Share this page on...