how did you manage this?

I tried something similar with the rf280r. I tried to send a "Reset" command immediatly (as described above, of corse in a 3964R-Msg), but i did not succeed and continues blinking green...

greetings,

Daniel

------------------------------------------------------------------------------------------
Split from Interfacing RF340R with a PC.

Hi,

could you provide more information to your problem?
If I understand correctly, are you trying to run the reader on the PC?
Which MLFB has your reader?

Hi,

sorry for the late answer, i was busy by another projects.

It is 6GT2002-0LA00

Please verfy the MLFB. 6GT2002-0LA00 is a RF120C. Right?

Have you received any data from the reader?

Have you tried connecting a different device to make sure your communication is basically working?

sorry,

it is an: 6GT2821-8AC10 rf280r, wrong copy & paste.

i got it basically working, right now, i made it to send a reset.Next step for me is to extract the binary sequences for another commands like read or SLG STATUS. It is a bit difficult get some Literature of it...

What do you need? Most of the information should be available in this conversation:

Interfacing RF340R with a PC

Right now, the most important would be all another command telegrams. I could not find it by the post.

WRITE, READ, SLGSTATUS, END, SET-ANT, MDS-STATUS, etc. But in the worst case, i will fild it out by sniffing. So, if anyone has it, it will be appreciated. But if not, this is not so a big problem.