7/17/2023 1:43 PM | |
Joined: 9/27/2006 Last visit: 9/10/2024 Posts: 12282 Rating:
|
Hello RoyMcD; Logo! units from v8.1 can communicate over Modbus TCP, to interface with a CAN unit you would need a gateway of some sort. We have oftn used gateways from Anybus in our projects. We have found them not only affordable, but reliable and the configuration software is not overly complex. Have a look at this product presentation page from Anybus, go down to the Case Studies section and you will have access to information on their Modbus TCP/CAN communicator. https://www.anybus.com/technologies/industrial-ethernet/modbus-tcp Hope this helps, Daniel Chartier |
Last edited by: dchartier at: 07/17/2023 16:34:47 |
|
This contribution was helpful to
1 thankful Users |
7/17/2023 2:11 PM | |
Joined: 9/3/2021 Last visit: 4/3/2024 Posts: 9 Rating:
|
Thank you Daniel, I have contacted them for pricing. Regards Roy |
Follow us on