11/13/2023 4:23 AM | |
Joined: 11/23/2021 Last visit: 5/14/2024 Posts: 4 Rating:
|
Hi All, Attached is a small program that Id like to do the following: When switch is pressed, start Output for 10 seconds. Then pause for 50 seconds, and check if button is still pressed. If so, start Output for 10 seconds. Then repeat continually..... Im missing something obvious so could you please point me in the right direction? Cheers from New Zealand! AttachmentDoser BASIC.zip (411 Downloads) |
11/13/2023 5:41 AM | |
Joined: 12/18/2014 Last visit: 9/1/2024 Posts: 33660 Rating:
|
Try this ... |
This contribution was helpful to
1 thankful Users |
Follow us on