11/16/2023 11:42 AM | |
Joined: 7/19/2022 Last visit: 9/11/2024 Posts: 383 Rating:
|
Hello ivh, First verify that you have activated the Sm@rtserver service in the project, in the Comfort properties and then at the Control panel level. All this is detailed in this section of the manual: Configure Sm@rt Server Try connecting directly to the computer and HMI to rule out network and/or equipment problems. |
If this Information really helps, you could use the Rate function |
|
11/16/2023 3:02 PM | |
Joined: 11/28/2007 Last visit: 6/24/2024 Posts: 20 Rating:
|
Thank you. Then we most go to the project to do this. |
Follow us on