JBS98

Yes, when WinCC flexible 2004 or higher is mentioned, it includes WinCC flexible 2008 SP5.

The only thing necessary is to load the corresponding image to the panel. To do this, you must set the image path in the Prosave window so that the WinCC flexible image can be found and loaded.

Usually the path is as follows: C:\Program Files (x86)\Siemens\Simatic WinCC flexible\WinCC flexible Images\TP170A_Micro and there is the image file "TP170A_Micro_V7_2_4_2.img"

 So, does the TP170A use the same image as the TP170A_Micro? I would have thought that there would be a different image for the TP170A.

------------------------------------------------------------------------------------------
Split from Programming TP170A with WinCC Flexible 2008 ?.

Jim_Moore

 So, does the TP170A use the same image as the TP170A_Micro? I would have thought that there would be a different image for the TP170A.

 Correct, it's the same image