Hello to everyone. 

I have pcs7 step7 v5.5_sp4+hf9 and i want to update the HW/config in order to install the 6ES7155-5AA01-0AB0 in my project. Is it possible? will i install the card via gsd or HW update? in my project i already have the 6ES7155-5AA00-0AB0 can i use this?

in the manual say: 

Engineering with • STEP 7 TIA Portal configurable/integrated as of version V14 or higher with HSP 0223 / integrated with V15 or higher • STEP 7 configurable/integrated as of version GSDML V2.32 • PROFINET as of GSD version/GSD revision V2.3 /

Thanks in advance.    

Hi,

as stated in the delivery release for 6ES7155-5AA01-0AB0:

Sales and delivery release of revised version of the standard IM 155-5 PN ST interface module for ET 200MP

The revised module with the Article No.6ES7155-5AA01-0AB0is spare parts compatible with the predecessor module Article No.6ES7155-5AA00-0AB0which it replaces. When replacing the -5AA00- with a -5AA01- (spare parts case), the previous configuration can be retained without the need for any changes

-----------------------------

So yes, it should be possible to use th "old" product number in hw-config.

Otherwise you can install the latest GSDML file for ET200MP system, but there can potentially be issues with GSDML file version with older versions of STETP 7 or PCS 7.

regards

sancruz