5/2/2024 4:57 PM | |
Joined: 8/23/2022 Last visit: 6/15/2024 Posts: 9 Rating:
|
Hi, in the attached diagram, I am entering the value for on threshold from web server through AM1, My goal is to keep this value in vrw0 so everything is set after power failure. everything works fine, except there is no retentivity, e.g. after power failure threshold becomes 0 again. ------------------------------------------------------------------------------------------ AttachmentSaveinVRmemory.pdf (150 Downloads) |
Last edited by: Jen_Moderator at: 05/03/2024 04:23:00New subject after splitting |
|
Follow us on