Navigation
Rating 
Thanks 0
2 Entries
| 5/10/2024 4:47 PM | |
Joined: 5/10/2024 Last visit: 5/12/2024 Posts: 1 Rating:
|
Hi PLC goes in STOP mode . Pl suggest Module address : 462 what it means ? Diagonosis message ---> Event 1 of 500: Event ID 16# 457F STOP caused by STOP command FB number: 9 Module address: 462 Previous operating mode: RUN Requested operating mode: STOP (internal) Internal error, Incoming event 05:54:28.459 AM 01/15/1994 (Coding: 16# 457F FF84 8E00 0101 0009 01CE) Event 2 of 500: Event ID 16# 2943 I/O access error, writing P area, byte access, Access address: 1797 Requested OB: I/O access error OB (OB122) Priority class: 11 External error, Incoming event 05:54:28.447 AM 01/15/1994 (Coding: 16# 2943 0B7A 0010 0705 0000 0000) Event 3 of 500: Event ID 16# 2943 I/O access error, writing P area, byte access, Access address: 1796 Requested OB: I/O access error OB (OB122) Priority class: 11 External error, Incoming event 05:54:28.447 AM 01/15/1994 (Coding: 16# 2943 0B7A 0010 0704 0000 0000) Event 4 of 500: Event ID 16# 2943 I/O access error, writing P area, byte access, Access address: 1795 Requested OB: I/O access error OB (OB122) Priority class: 11 External error, Incoming event 05:54:28.447 AM 01/15/1994 (Coding: 16# 2943 0B7A 0010 0703 0000 0000) Regards, Anand ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 05/13/2024 08:46:32New subject after splitting |
|
Follow us on