5/24/2024 11:24 AM | |
Joined: 3/11/2019 Last visit: 6/17/2024 Posts: 1477 Rating: (266)
|
Hi, most likely you have to use the MFCT to configure the ET200SP station. Afterwards this configuration set/data can be used in the ES of the modbus controller. Multi Fieldbus Configuration Tool (MFCT) just three steps to the finished project planning of a MultiFieldbus device:
Additional information: SIMATIC ET 200SP Interface Module IM 155-6 MF HFMultiFieldbus - An Overview of the Most Important Documents and LinksDelivery release of the ET 200SP MultiFieldbus Interface Module IM155-6MF High Feature with firmware version V5.0.3regards sancruz |
Feedback appreciated, please rate |
|
Follow us on