Logo 8.4 Email Sending Setup For Monitoring_2
Created by: AutoGen_4108059 at: 1/24/2025 6:31 PM (2 Replies)
Rating 
Thanks 0
3 Entries
| 1/24/2025 6:31 PM | |
Joined: 1/13/2025 Last visit: 3/9/2025 Posts: 25 Rating:
|
Hi everyone So I am new in this forum as well in logosoft. I am tryin to learn from your experts how to program and use PLC. Until now i felt ok,but. I am working on budget frendly monitoring project. Basically, I would like to have PLC inputs to send email to me regarding machine monitoring. My issues. 1. Router hardware and setup for PLC to use. 2. Program diagram just a one input, i should e able to figure out rest. (I have tried so many options to write program myself but absolutely no luck) Thank you ahead ------------------------------------------------------------------------------------------ |
Last edited by: Moderator_Lan at: 01/27/2025 07:06:47New subject after splitting |
|
| 1/24/2025 6:45 PM | |
Joined: 12/18/2014 Last visit: 9/14/2025 Posts: 35960 Rating:
|
You don't write which LOGO! you have. Sending email with LOGO! at time only possible with a LOGO! 8.4. |
| 1/27/2025 7:07 AM | |
Joined: 7/30/2024 Last visit: 9/12/2025 Posts: 948 Rating:
|
Topic closed because the question was posted twice. The active thread can be found here: Logo 8.4 Email Sending Setup For Monitoring
Kind regards, Moderator_Lan |
Follow us on