7/2/2020 12:38 PM | |
Joined: 9/3/2013 Last visit: 11/3/2023 Posts: 152 Rating:
|
Hello Vahid, you need a F-CPU . (Most H-CPUs are also F-CPUs) Do you have have installed F-system ? You need to setup a password for your CPU in the HW-config to configure a fail-safe card. You also need to setup a Safety Password if you implent a fail-safe block. You find more Informations here: https://support.industry.siemens.com/cs/de/en/view/109757545 regards |
Last edited by: Technodrome at: 10/29/2020 22:18:03 |
|
This contribution was helpful to
1 thankful Users |
7/4/2020 9:11 PM | |
Joined: 8/29/2018 Last visit: 8/1/2024 Posts: 29 Rating:
|
My special thanks goes to you, that really helped me to solve my problem. |
Follow us on