5/27/2011 12:25 PM | |
Posts: 50 Rating: (1) |
HI Thanks for the reply i have CPU412-3H with CP443-1 at one side other side CPU314 withCP343-1Lean |
5/27/2011 12:49 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181)
|
Hello, Check there https://www.automation.siemens.com/net-static/Quickstart2009/quickstart012003/html_76/ethernet/ie_tcp.htm Best regards, Hristo Mihalev |
5/27/2011 1:22 PM | |
Posts: 691 Rating: (36) |
You can configure simple S7 Connection to both CPU and use either AG_Send/AG_Recieve or Get/Put Function |
5/27/2011 1:33 PM | |
Joined: 1/28/2009 Last visit: 5/2/2024 Posts: 6838 Rating: (1359) |
Hi Check here for variety oof sample configurations and programming tips.But, those examples needs basic knowledge about the communication functions used in them. regards Industrial Ethernet - TCP/IP Protocol with S7 Communication between two SIMATIC S7 Stations |
5/28/2011 10:05 AM | |
Posts: 50 Rating: (1) |
Hi S7 connection is not able to configure in cp343-1lean with cp443-1 |
5/28/2011 11:37 AM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181)
|
Not in CP343-1 lean, you should configure the connection in Cp443-1 sides, as already it was mentioned above from Shar . best regards, Hristo Mihalev |
Last edited by: UMENCHO at: 5/28/2011 11:38 AMtypo |
|
5/28/2011 12:48 PM | |
Posts: 691 Rating: (36) |
Yeah you will see the connection on 400 station not in 300 station |
5/28/2011 1:01 PM | ||||||||
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181)
|
You should configure the connections in S7-400 CPU - in both H CPUs and using the example from my post above. There have S7 connection TCP/IP protocol
|
|||||||
5/28/2011 1:17 PM | |
Posts: 50 Rating: (1) |
Hi |
5/28/2011 1:21 PM | |
Posts: 50 Rating: (1) |
hi Thanks for the reply the uploaded file is exe file how to open the same in step7 project |
5/28/2011 1:27 PM | |
Posts: 50 Rating: (1) |
hi, i am transferring around 200bytes of data through ethernet communication which blocks are compatible for the same |
5/28/2011 1:31 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181)
|
Double click and follow the steps there. The idea is unpack the containing of the file in selected folder and then in Simatic Manager select it and open the project... Info about quantity of transfered data and descriptions of used blocks you could find from there How do you configure a specified and an unspecified S7 connection for data exchange between S7-300 and/or S7-400 by way of Industrial Ethernet CPs? best regards, Hristo Mihalev |
Last edited by: UMENCHO at: 5/28/2011 1:42 PM |
|
5/28/2011 1:44 PM | |
Posts: 50 Rating: (1) |
hi thanks for the reply i had opened the backup whether getput blocks are compatible for the 200 bytes of data transfer |
Follow us on