2/15/2021 12:04 PM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
Hello Dear The photos related to your question attached in three post. |
2/15/2021 12:05 PM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
|
2/15/2021 12:06 PM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
|
2/15/2021 9:18 PM | |
Joined: 9/27/2006 Last visit: 5/17/2024 Posts: 12257 Rating: (2668) |
Hello MnShabad; See the screenshot below for an answer to your question: what is MLFB. It was extracted from this discussion, if you are interested: https://support.industry.siemens.com/tf//ww/en/posts/meaning-of-mlfb/73760/?page=0&pageSize=10 Basically, we would like to know the part number of the module that is giving you trouble, and if it was selected from the PCS 7 hardware catalog. Hope this helps, Daniel Chartier |
This contribution was helpful to2 thankful Users |
2/16/2021 11:11 AM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
the respective result compile tab. |
2/16/2021 11:13 AM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
the respective result module driver tab. |
2/16/2021 11:15 AM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
the respective result texual interconnection tab. |
2/16/2021 11:26 AM | |
Joined: 12/20/2019 Last visit: 5/7/2024 Posts: 59 Rating: (0) |
The MLFB is: 6ES7 321-7BH01-0AB0 |
2/17/2021 5:38 PM | |
Joined: 9/1/2017 Last visit: 12/20/2023 Posts: 156 Rating: (19) |
Hi The conclusion of our discussion must be that your hardware does not match with your pcs7 version,but: I checked siemens compatibility tool which says 6es7-321-7bh01-0ab0 is compatible with step7 v5.5 sp1 and 6es7-321-7bh01-0ab0 v2 is compatible with step7 5.4 sp3 So there is no matter with all pcs7 v8 variants. It also exist in PCS7 Released Modules (V8.0 SP2). At last i tried some test with pcs7 v8.0 upd1 and v8.0 sp2,using s7-400/400H and ET200M. Depends on which IM i used, 6es7-321-7bh01-0ab0 can be find im pcs7 or standard profile of hw config. I tested both case and there were no problem in compilation and generating module drivers. So, If it is possible you can send your project. If not test your project in another pcs7 system. And finally you can handle your channel driver manually Hope this helps Regards Hosein |
This contribution was helpful to1 thankful Users |
Follow us on