Hi All!

I have a problem with my system.

I work with a CPU 15121SP (Tia V15 with library v5.1), an interface RF180C, two reader RF350R with ANT18.

The tags are MOBY E MDS E623.

I don't have any problem in hardware configuration.

I create a Tecnological object with this parameter:

RF300 Gen2

115.2 kBaud

Presence On

Reset LED Off

Mode normal

Trasponder Type ISO, RF300, MOBY E

When I start Reset_RF300 I don't have any problem.

When I start Read, the system remains in BUSY.

Someone can help me?!?

Owei

Hi Pedra,

can you show us the HW configuration of your RF180C? I assume that the input and output addresses of the module don't match each other.

 Hi Owei,

I send you the configuration

Owei

Hi Pedra,

can you show us the HW configuration of your RF180C? I assume that the input and output addresses of the module don't match each other.

 I change Address Tag (the same of the hardware configuration)... but the result is always BUSY...

I solve my problem finally!!!

The optional package used is version V4.1. This version create a loop in the block Read. 

When I try to use V4.0, I read RFID correctly.

Thanks ;)

Owei

Ok. I'd even suggest to use lib version 5.2. But for this you'll need TIA V15 or greater.

 I work with V15, but my lib. version is V5.1

Only select version block V4.0 I can read tags