1/7/2018 7:29 PM | |
Posts: 200 Rating: (6) |
Taking the example from a previous post the value that is given i would like to change from the HMI i have use a simple I/O display on the screen which is replicating the figure that the Logo is giving out, in the HMI i can press on the value and it allows me to enter a figure bit when i press enter it goes bach to figure in the Logo and docent change hope this makes sense i can send some screen shots in the morning thanks AttachmentPressure.lsc.zip (201 Downloads) |
This contribution was helpful to1 thankful Users |
1/8/2018 2:49 PM | |
Posts: 200 Rating: (6) |
form my attached program B002 the ON and the OFF Thanks Andrew |
1/8/2018 3:05 PM | |
Joined: 12/18/2014 Last visit: 5/22/2024 Posts: 33092 Rating: (4085)
|
In attachment is a video. This shows you the way how you can map parameters of blocks into the VM area. In HMI you must use in the I/O fields in this case the words VW0 and VW2 as an integer with 3 decimal places. AttachmentParameter VM Mapping.zip (237 Downloads) |