Hi guys !

I am a little lost whith the web server. I'm sorry

Is it possible to send me the program with network inputs ?

I attach de diagram below.

Ps : I would like that when I press a button on the web page, the elevator move to the requested floor 

Thanks you very much !

Gaultier

Thanks you !

But what i should use as block on LWE program ?

I have to put what as parameters for the buttons, sensors and outputs

Don"t give up please !

I have test your program and it works well. 

In the LWE program, I have insert digital value:

Button 0 ==> Block Type "V" ==> Block Number 0.0

Button 1 ==> Block Type "V" ==> Block Number 0.1 

The same for all...

But On the web Page, when I want to clik ( with the mouse) on the Button nothing is happening.

But On my box contrôle, when i push button 0 , I see on my web page that Sensor 0 is ON et the Q2 ( Go down) is ON.

Never give up please

Gaultier

Yes Your program works well and tank you very much for your patience.

I have juste 2 problems:

1) The floor number post Nothing in the web serveur. 

I think that because My LCD screen is not relied to a entry in my logo but juste Q3 and Q4. I join a picture. 

it is a binary operation to display the numbers on the screen

When Q3 is actived, A =2^0 ==> 1

When Q4 is actived, B = 2^1 ==> 2

When Nothing is actived ==> 0

The up arrow is wired in parallel with the motor relay KA2 . So when the KA2 is actived, the up arrox is displayed on the screen LCD.

The down Arrow is wired in parallel with the motorrelay KA1.

2) It's a little probleme. When the elevor is in front of sensor 1, the LCD screen dispay "2" 

And When the elevator is in front of sensor 2, the LCD screen display "1"

Thank you !

I have resolved the problem !

Thanks