Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

F-TM ServoDrive ST and 24V gear motor

Created by: Andrzej_Juzwa at: 10/6/2022 6:56 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/6/2022 6:56 PM	Rate (0)
Andrzej_Juzwa Joined: 1/17/2022 Last visit: 3/21/2024 Posts: 3 Rating: (0)	Hello, I would like to use 24VDC gear motor together with F-TM ServoDrive ST module (6BK1136-6AB00-0BU0). In documentation I find the connection instruction for 3 phases motor (U/V/W). How to connect the motor with 2 cables (24/0 VDC) ? Thanks for answers. Best regards.

Suggestion To thank Quote Answer

10/7/2022 12:35 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello Andrzej_Juzwa, the F-TM ServoDrive ST supports permanent magnet synchronous motors. If you are using permanent magnet DC motors with mechanical commutator you can use MICRO-Drive PDC. https://www.siemens.com/global/en/products/drives/sinamics/servo-drive-system-simatic-micro-drive.html Maybe the TM Pulse module is also solution for you. https://support.industry.siemens.com/cs/ww/en/view/109768441
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on