Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Saving Simotion Variables to MMC

Created by: gnook at: 1/30/2006 3:01 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/30/2006 3:01 PM	Rate (0)
gnook Posts: 42 Rating: (1)	I am aware that there is a function to save variables from the Simotion controller to MMC using the 'Shutdown' task and then read them back using the 'Startup' task. Unfortunately I have lost some refrence code I had for performing this task. Can anybody help me with some refrence code or a pointer to a suitable FAQ or manual excerpt?
gnook Posts: 42 Rating: (1)
Suggestion To thank Quote Answer

2/3/2006 11:43 PM	Rate (0)
Dong Posts: 13 Rating: (1)	why don't you use retainable variables instead?
Dong Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

2/3/2006 11:50 PM	Rate (0)
Dong Posts: 13 Rating: (1)	Sorry, forgot to answer your question. Please use command "_savePersistentMemoryData" Dong
Dong Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

2/13/2006 2:36 PM	Rate (0)
gnook Posts: 42 Rating: (1)	Retained variables is fine when the system is not indevelopment (as mine is at the moment) and I have had some bad experiences with retained data.
gnook Posts: 42 Rating: (1)
Suggestion To thank Quote Answer

6/23/2006 8:57 AM	Rate (0)
Manfred Experienced Member Joined: 6/22/2006 Last visit: 3/7/2022 Posts: 156 Rating: (17)	To save variables you can also use the function _exportUnitDataSet/_importUnitDataSet. See documentation ST_Programming.pdf (6.17 Backing up data from the user program) or search in the online help for this function.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on