Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Servo motor Brake

Created by: ŠΜS at: 1/29/2011 3:17 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

1/29/2011 3:17 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Hi I am using 1FT6108-8AC71-1AB0 motor,it is near about 15 years old. when I give 24V dc to release the motor brake, the shaft becomes magnetized. But in new motor I could not find this.My dough is ,whether any problem is in the motor? If not why it became magnetized.
	Regards, ŠΜS
Suggestion To thank Quote Answer

2/1/2011 7:19 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... What is the type of new motor are you using could provide the details? Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

2/1/2011 3:15 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Ekalavya Hello... What is the type of new motor are you using could provide the details? Regards, Ekalavya Dear Ekalavya, Motor spec is 1FK7105-5AC7 ,48 NM
	Last edited by: Muthamizh at: 2/1/2011 3:19 PM Added NM Regards, ŠΜS
Suggestion To thank Quote Answer

2/1/2011 6:39 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	provide the full type no? Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

2/2/2011 11:19 AM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Ekalavya provide the full type no? Regards, Ekalavya 1FT7101-5AF71-1FH0 , 27NM
	Regards, ŠΜS
Suggestion To thank Quote Answer

2/3/2011 12:11 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Dear Mr. Muthamizh Again the type no is wrong provide me the correct one? Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

2/4/2011 3:23 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Ekalavya Dear Mr. Muthamizh Again the type no is wrong provide me the correct one? Regards, Ekalavya Sorry for the wrong spec. here is the correct spec 1FK7101-5AF71-1EH5
	Regards, ŠΜS
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on