Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Confusion In CPU selection

Created by: Anant.singh at: 11/16/2011 11:08 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/16/2011 11:08 AM	Rate (0)
Anant.singh Posts: 26 Rating: (0)	Kindly refer to the following Requirement :- (Digital Input: 800 Digital Output: 600 Analog Input: 120 Analog Output: 12 SCADA PCS 7: 2 run time license All ios will interface on Profibus & PLC & SCADA will be on profinet. Please note that above configuration will be used for power plant application.. ) Which CPU has to be selected for above requirement 1.CPU 317-2 PN/DP 1 Mb or 2.CPU AS 414-3IE 2 DP 2.8 Mb
Anant.singh Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

11/20/2011 9:08 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Anant.singh Kindly refer to the following Requirement :- (Digital Input: 800 Digital Output: 600 Analog Input: 120 Analog Output: 12 SCADA PCS 7: 2 run time license All ios will interface on Profibus & PLC & SCADA will be on profinet. Please note that above configuration will be used for power plant application.. ) Which CPU has to be selected for above requirement 1.CPU 317-2 PN/DP 1 Mb or 2.CPU AS 414-3IE 2 DP 2.8 Mb Dear Anant.singh , Chek the following topic: HOW TO SELECT A CPU FOR PROCESS PLANT Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

11/28/2011 8:36 AM	Rate (0)
aikona Posts: 487 Rating: (36)	Hi Personnaly I would go for the S7-400 type Eric
aikona Posts: 487 Rating: (36)
Suggestion To thank Quote Answer

11/28/2011 1:31 PM	Rate (0)
Anant.singh Posts: 26 Rating: (0)	Thanx 4 the Info
Anant.singh Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on