Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How can I find servo motor I need?

Created by: metamorphogenesis at: 11/27/2019 5:32 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/27/2019 5:32 PM	Rate (0)
metamorphogenesis Posts: 1 Rating: (0)	Hi! Does anyone know how can I find servo motor with especial parameters? We're going to replace Rexroth MKD071B-061-GP1-KN with Siemens motor and this one 1FK7064-4CF71-1BH1 has the most similar electrical and dynamic parameters. But I can't find any drawings with readable dimensions to check if it compatible. And we also already have SINAMICS S120 drives, so I also need to check if this motor compatible with that drive, and how can I choose copmatible motor if not. Thanks for help.
metamorphogenesis Posts: 1 Rating: (0)	Last edited by: metamorphogenesis at: 11/27/2019 18:55:45
Suggestion To thank Quote Answer

11/28/2019 12:34 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/12/2024 Posts: 5938 Rating: (816)	Hello metamorphogenesis, you can use DT Configurator to generate dimension drawings of your selected motor: www.siemens.com/dt-configurator The 1FK7 can be operated with the S120. You can find our recommended Sinamics Motor Modules in the catalog D21.4, chapter 8, starting on pg. 8/32: https://support.industry.siemens.com/cs/ww/en/view/109747019 Here you can find the 1FK7 configuration manual for S120: https://support.industry.siemens.com/cs/ww/en/view/55379345
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on