Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to connect PLC to PC.

Created by: tazan at: 6/30/2006 3:23 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/30/2006 3:23 AM	Rate (0)
tazan Posts: 6 Rating: (0)	I have designed a simple SCADA system for a test in which there are only one PC takes responsibilities of supervising, storing data from process and one PLC takes responsibilities of taking data from sensors, calculating and sending them to the PC. But I have no actual PLCs, I’m using Siemens SIMATIC Step 7 software and PLC Sim for the test. Could you tell me how to connect the PC to the PLC which in fact is a PC with Siemens SIMATIC Step 7 software? Thanks!
tazan Posts: 6 Rating: (0)
Suggestion To thank

6/30/2006 10:08 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/8/2024 Posts: 4111 Rating: (195)	Closed: cause thread was posted twice. The other thread with answers you can find here: connecting a PLC to a supervisory PC?
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on