Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

diagnostic data of profibus slave devices through CP

Created by: sandoz at: 2/27/2007 7:09 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/27/2007 7:09 AM	Rate (0)
sandoz Advanced Member Joined: 8/24/2006 Last visit: 3/20/2024 Posts: 20 Rating: (2)	In main rack we have s7 CPU 315-2DP along with two nos of CP342-5 connected in same main rack.Both CP's are configured as master. Master Cp1 is connected with Simocode(21Nos),Sentron(14 Nos),Simeas P(5Nos),Siprotec(5Nos) and ET 200M(5NOs).Master CP2 is connected with Simocode(8 Nos),Sentron(3 Nos),and ET 200M(1NO). We have to Know how to read the diagonastics status of Slaves connected with CP's. What fb fc is used for getting diagnostic data.

Suggestion To thank Quote Answer

2/27/2007 11:49 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating: (1171)	Hello sandoz, Have you seen the following links: http://support.automation.siemens.com/WW/view/en/21626695 http://support.automation.siemens.com/WW/view/en/6167276 So perhaps FC3 DP_Diag can help you. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on