Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

difference between WinCC 6.0 sp3 and sp3a

Created by: Engelbert at: 1/13/2006 1:22 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/13/2006 1:22 PM	Rate (0)
Engelbert Posts: 19 Rating: (0)	Hello, does anybody knows the difference between WinCC 6.0 sp3 and WinCC 6.0 sp3a (that comes with PCS7 6.1)? Can I transfer projects to an sp3 installation? Thanks in Advance Engelbert Rodríguez ICESA Spain
Engelbert Posts: 19 Rating: (0)
Suggestion To thank

1/16/2006 8:13 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi Engelbert, SP3a is a ServicePack, just released for PCS 7 (and not for native WinCC). regards, Nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank

1/16/2006 9:39 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/14/2024 Posts: 4113 Rating: (195)	Closed: cause topic posted twice. Here you will find the second topic with all replies: Difference between WinCC 6.0 sp3 and sp3ain the conference SIMATIC HMI Human Machine Interface
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on