3/14/2021 4:22 AM | |
Joined: 9/27/2006 Last visit: 8/14/2024 Posts: 12277 Rating:
|
Hello jackie; We used Starter v5 the last time we did an upload/download to a MM440. Here is a link to the software v5.4 download: https://support.industry.siemens.com/cs/us/en/view/26233208 You should check the supported OS and firmware versions of your drives to make sure you can work with them with Starter. The information is available inside the link. Hope this helps, Daniel Chartier |
This contribution was helpful to
1 thankful Users |
Follow us on