Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to get a yearly timer?

Created by: ABED1957 at: 5/10/2024 2:14 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

5/10/2024 2:14 AM	Rate (0)
ABED1957 Joined: 3/20/2024 Last visit: 10/30/2024 Posts: 1 Rating: (0)	hi i need a yearly timer in simatic manager step7-300. how to get that? and how to set that? ------------------------------------------------------------------------------------------ Split from Live Time comparison.
	Last edited by: ABED1957 at: 05/10/2024 02:15:20 Last edited by: Jen_Moderator at: 05/10/2024 06:31:20 New subject after splitting
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users jacek d

5/10/2024 7:40 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 11/12/2024 Posts: 4026 Rating: (602)	Hi, I don´t know such a ready Timer to use. You can use SFC 1 Read Sytem Clock to compare output with a DT Datatype variable as example... Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

5/19/2024 11:22 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Dear users, I suggest reading the following old thread in the forum: pulse signal at the end of the year Time of Day interrupts and using SFC1 were discussed with a solution. I hope it helps, hdhoseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

5/19/2024 11:59 AM	Rate (0)
Gustavo Antonio B... Member Joined: 6/20/2017 Last visit: 11/11/2024 Posts: 443 Rating: (40)	For yearly timer do you mean a scheduler using the system date or a timer with very long time capability up to years?
	Gustavo Antonio Banchetti Brucatori.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on