Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

micromaster pc tools

Created by: casio at: 8/15/2006 9:44 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/15/2006 9:44 PM	Rate (0)
casio Posts: 9 Rating: (0)	hi, we just purchase new machine equipment with s7 200 plc and micromaster 440.there is a cd rom for mm4 and when i open it it says that s7 need to be install.i'm very much comfuse if i will continue the set up because my laptop have already s7 200 software installed.do i just continue installing the mm4 starter cd rom?? thanks, senen
casio Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

8/21/2006 2:21 PM	Rate (0)
mohamed elsawy Regular Member Joined: 12/28/2005 Last visit: 6/10/2007 Posts: 20 Rating: (2)	You should do that , but first watch the software version of both and competability Attachment S7200_MM4_USS_Connection.pdf (1020 Downloads)

Suggestion To thank Quote Answer

9/21/2006 10:43 PM	Rate (0)
casio Posts: 9 Rating: (0)	thanks mohamed, I installed the software and we are going to purchase the pc to mm4 connecting kit.All we need actually is to save the parameters and configuration of the drive to our pc.I have another issue,i read in the manual about this add on software: instruction library part # 6ES7 830-2BC00-0YX0.Do i really need this software ??? It look like the program we have is written with this software .I can see this uss-init and drv-ctrl block in the plc program. thanks again, casio
casio Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/25/2006 1:37 AM	Rate (0)
The Keeper Advanced Member Joined: 4/6/2006 Last visit: 9/13/2024 Posts: 24 Rating: (2)	Another option instead of purchasing the PC to MM440 kit is to get a RS-232 to RS-485converter. You can get it from B&B Electronics Part# 485SD9TB, their web site is www.bb-elec.com this provides a terminal strip going on the output of the converter so you can connect a 2 conductor cable to it. You connect the converter to terminal strip #29 & 30 on the drive. I have found this easier than the converter, also you still have the front operator panel.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on