Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Know-How protection

Created by: jelcyno at: 2/23/2006 3:01 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/23/2006 3:01 PM	Rate (0)
jelcyno Posts: 39 Rating: (1)	Hi How can I add know how protection to the block which I'll write? thanks
jelcyno Posts: 39 Rating: (1)
Suggestion To thank Quote Answer

2/23/2006 8:31 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/12/2024 Posts: 4352 Rating: (1452)	Hi, you need create a source of your block, add a keyword know how protect and compile the source again. See FAQhttp://support.automation.siemens.com/WW/view/en/10025431
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

2/24/2006 9:08 AM	Rate (0)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 11/12/2024 Posts: 4785 Rating: (730)	And before giving copy of a program to people being subject to this protection, delete all source code of protected blocks. BTW, you should be aware that this protection isso weak that it's hard to call it protection at all. [;)]
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on