6/9/2022 12:58 PM | |
Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)
|
hi radu, here you find the Arrangement and usage of integrated inputs/outputs of your PLC. The inputs need the M-potential on Pin 20. hope this helps, regards, |
FCK WAR! |
|
6/9/2022 1:48 PM | |
Posts: 40 Rating: (0) |
The sensor is a switch sensor, and the module config is the default one |
6/10/2022 12:46 PM | |
Posts: 40 Rating: (0) |
The LED of the DI/DO module does not turn on. And even if I force an output value on DO, it will still not turn on on the physical module. |
6/14/2022 12:53 PM | |
Posts: 40 Rating: (0) |
Hi! It's me again. I solved that issue, [snip] |
Last edited by: Jen_Moderator at: 06/21/2022 14:39:01Divison of question into separate topic. |
|
Follow us on