SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

S7200 CPU-224 Communications time-out error

7/22/2024 10:41 AM	Rate (0)
Sreekharan Joined: 7/22/2024 Last visit: 7/24/2024 Posts: 3 Rating: (0)	Sir, We have a spare seimens S7-200 PLC and are trying to communicate, but showing communications time-out error, activity LED blinking in USB A2 adapter, but not getting connecting with port 0. The same laptop and settings were used to connect another similar S7-200 PLC in service. Please guide how to resolve this issue and get access to this PLC. Attachment pro-BBBvYYlQ.jpeg (262 Downloads)

Suggestion To thank Quote Answer

7/22/2024 11:43 AM	Rate (0)
Hank88 Joined: 7/10/2024 Last visit: 11/8/2024 Posts: 52 Rating: (6)	Hello Sreekharan With the PC Adapter USB A2 it is possible to connect to the S7-200 but it must be configured as described in the manual of the adapter. The manual can be downloaded from this link: https://support.industry.siemens.com/cs/us/en/view/68849363 and note the information on page 10. I hope this is helpful
	If you found this post helpul, I'd greatly appreciate your feedback. Your thoughts make a difference. Thanks for the support.
Suggestion To thank Quote Answer

7/22/2024 12:25 PM	Rate (0)
Sreekharan Joined: 7/22/2024 Last visit: 7/24/2024 Posts: 3 Rating: (0)	thank You for the prompt response, manual not accessible through the link provided, if possible please mail to sipatchpcni@gmail.com.

Suggestion To thank Quote Answer

7/22/2024 8:57 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 11/7/2024 Posts: 4193 Rating: (472)	You could of had a little effor on finding the manual by your self. Here's the top search from google. PG/PC - PROFIBUS 4PC Adapter USB A2 manual

Suggestion To thank Quote Answer

7/24/2024 4:28 AM	Rate (0)
Sreekharan Joined: 7/22/2024 Last visit: 7/24/2024 Posts: 3 Rating: (0)	Thank you sir, this manual is already available with us, and we have already configured as per the same. The configured system was connected with a similar PLC in service. We are unable to connect with a spare PLC with us, where in activity LED is also blinking during the connection attempt. Please understand the same and provide solution if any.

Suggestion To thank Quote Answer

7/25/2024 3:29 PM	Rate (0)
Henry1675 Bronze Member Joined: 3/9/2018 Last visit: 11/8/2024 Posts: 192 Rating: (15)	You tried to scan for the PLC on all 3 baudrates? Put the plc in stop mode to be sure the port isn't being used by the program.

Suggestion To thank Quote Answer

Share this page:

Share this page on...