5/4/2008 2:58 PM | |
Posts: 2348 Rating:
|
You should provide +24V to CP - for example from CPUs clamps. ^) |
5/4/2008 3:32 PM | |
Joined: 9/27/2006 Last visit: 7/29/2024 Posts: 12272 Rating:
|
Hello pici_c; Is this the manual you were looking for? http://support.automation.siemens.com/WW/view/en/23643456 Chapter 3 shows where and how to connect the power supply. Hope this helps, Daniel Chartier |
Follow us on