5/9/2008 11:21 AM | |
Joined: 5/8/2008 Last visit: 6/20/2024 Posts: 50 Rating:
|
|
5/9/2008 2:49 PM | |
Joined: 4/24/2006 Last visit: 7/12/2024 Posts: 8711 Rating:
|
Hi, It is not possible please have a look at following faq: http://support.automation.siemens.com/WW/view/en/22255588 This is also when using WinCC flexible 2007. Best regards, Wizard |
Follow us on