10/16/2008 9:44 AM | |
Posts: 5 Rating:
|
Hi mates ! I'am Sami I am using an FM 357-2 like a big printer (a plotter) with 2 axis (servo drive+brushless) on x and y analog control mode I am truying to find a program, a kinda post processor or any software that generates directly a G code form dxf file, that could be copied and pasted in FM 357-2 edit tool to summerise i would like to have a software that translates DXF files into g code so i dont have to write a g code by my own every time... Any sugestions ?? Any help, advice, idea... would be welcome, i am just a student not a pro like you Help me learn and thx for reading my post Sami PS: ive sent a zip file of the kind of plots i want to draw Attachmenttest.zip (176 Downloads) |
10/19/2008 5:35 PM | |
Joined: 7/2/2008 Last visit: 8/26/2024 Posts: 928 Rating:
|
Take a look at this. http://www.dakeng.com/ace.html |
10/23/2008 2:25 AM | |
Posts: 5 Rating:
|
Ok H-H, will do ! thx for the answer, but even in autocad can i see the differents steps ov the creation of my design so i can rorder it ? |
Follow us on