Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Request for Information on the Operation of 1FT5 Servo Motor with Simodrive 610

Created by: MedHabib at: 5/22/2024 8:28 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/22/2024 8:28 AM	Rate (0)
MedHabib Joined: 4/22/2024 Last visit: 11/18/2024 Posts: 24 Rating: (0)	I have a servo motor model 1FT5 and a Simodrive 610. I would like to know how it operates, whether it is with software linked to the drive or with an S7-1200 PLC, or if there is another method. Thank you in advance for your help.

Suggestion To thank Quote Answer

6/2/2024 3:18 AM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/18/2024 Posts: 4075 Rating: (357)	you can read same manual MedHabib I have a servo motor model 1FT5 and a Simodrive 610. I would like to know how it operates, whether it is with software linked to the drive or with an S7-1200 PLC, or if there is another method. Thank you in advance for your help. Attachment SIMODRIVE-610-SIEMENS-MANUAL.pdf (415 Downloads)
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on