Hi all,

I've an ancient machine that uses a Simoreg A-106-110-503. I need the manual to check the parameters and the power connections to start up the machine again. If anyone can send me the manual will helps a lot. Thanks in advance.

Hello Rafael;

One possibility is to contact Siemens Support (here you will find forum users, mostly) and ask the techs there if these manuals are available in electronic format and can be transferred to you.

You should try the Support Request link that you will find at the top of this page.

hope this helps,

Daniel Chartier

 Hello Daniel,

Thanks for the idea! I'll try this way. Best regards.

dchartier

Hello Rafael;

One possibility is to contact Siemens Support (here you will find forum users, mostly) and ask the techs there if these manuals are available in electronic format and can be transferred to you.

You should try the Support Request link that you will find at the top of this page.

hope this helps,

Daniel Chartier

Hllo Rafael;

In the meantime, I located this document that possibly could help you out.

https://cache.industry.siemens.com/dl/files/287/21384287/att_41075/v1/6ra24imc-usa.pdf

Hope this helps,

Daniel Chartier

 Hi Daniel,

I've found that the Simoreg K 6RA22 looks like my equipment. I'll try to use this manual insted! Thaks for your help.

dchartier

Hllo Rafael;

In the meantime, I located this document that possibly could help you out.

https://cache.industry.siemens.com/dl/files/287/21384287/att_41075/v1/6ra24imc-usa.pdf

Hope this helps,

Daniel Chartier