Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

19011 Tag xxx: value could not be written to PLC.

Created by: Chris12345678 at: 1/29/2020 10:45 PM (22 Replies)

Rating (4)

Thanks 10

Result pages:: |; 1 | 2 | 3; |

23 Entries

Entries per page: 10 | 20 | all

8/22/2023 7:19 AM	Rate (0)
fubatchi Member Joined: 9/10/2018 Last visit: 11/6/2024 Posts: 3 Rating: (0)	i had a similar problem. after updating the firmware to the latest version of the HMI the problem is solved.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users 0_Einstein Jen_Moderator

6/19/2024 3:27 AM	Rate (0)
Top28 Member Joined: 7/12/2021 Last visit: 11/11/2024 Posts: 1 Rating: (0)	Hi All I have the same problem I use CPU 1517H-3 PN connect with HMI TP1200 comfort 1. In network connection I select PLC_1 When I simulate HMI&PLC working well 2. In network connection I select S7-1500R/H system_1 When I simulate HMI & PLC it can not communication it got error Tag xxx: value could not be written to PLC PLC config follow below PLC_1 X1 IP : 192.168.0.1, System IP : 192.168.0.10 X2 IP : 192.168.1.1 PLC_1 X1 IP : 192.168.0.2, System IP : 192.168.0.10 X2 IP : 192.168.1.2 HMI_1 X1 IP : 192.168.0.8 HMI connect with PLC by port X1 Thank you Top28 Attachment S__5947402.jpg (187 Downloads)

Suggestion To thank Quote Answer

11/13/2024 3:00 AM	Rate (0)
ysmm Joined: 11/13/2024 Last visit: 11/13/2024 Posts: 1 Rating: (0)	Time Zone in HMI must be equal to Time Zone in PLC, Be sure to configure both

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

23 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on